+30 210 82 27 825
Μάρνη 10, 10433 Αθήνα

HI983307

The HI-983307 conductivity (EC) meter is Hanna’s reply to requests for accurate, affordable process monitoring with low maintenance.
  • Visual LED alarms
  • Continuous EC monitoring
  • Ideal for pure water quality applicaations.

The HI983307 is supplied with a direct twopin probe and 2 m (6.6’) cable with a ½” thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C (41 to 122°F) with a β of 2% per degree.

In the measurement mode, a red LED will warn the user in the event the reading is outside of the alarm interval. A front trimmer allows manual one-point calibration. The electrical circuitry is tightly sealed inside the water-resistant enclosure. This EC monitor can be installed anywhere quickly and easily with the casings molded eye. The 12 VDC power supply allows continuous monitoring over extended periods of time.

Specifications

EC/TDS 
EC Range0.00 to 9.99 mS/cm
EC Resolution0.01 mS/cm
EC Accuracy?2% F. S
EC Calibrationmanual, one-point, through trimmer with HI70039
EC/TDS Temperature Compensationautomatic, 5 to 50?C (41 to 122?F)
Temperature Correction Coefficientβ=2%
General Meter
EC/TDS ProbeHI7632/2 (all probes are provided with 2 m (6.6’) cable and ½” thread for in-line installation)
Power Supply12 VDC adapter (included)
Environment0 to 50?C (32 to 122?F); RH max 100%
Setpoint0.70 to 3.50 mS/cm
Alarmred LED blinks when measured value differs from set point more than: ?0.20 mS/cm
Dimensions86 x 110 x 43 mm (3.4 x 4.3 x 1.7’’)
Weight215 g (7.6 oz.)
Ordering InformationHI983307 (115V) supplied with HI7632/2 EC/TDS probe, calibration screwdriver, 12 VDC adapter and instructions.